The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Lowered truck requires extra power when turning hard over.

**Accelo** · 07-18-2022, 01:15 AM

My lowered truck requires extra power when turning hard over.
I just had the truck aligned and I am surprised by how it acts when turning sharp corners. Extra rpm is required just to get the truck to roll.
The truck has CCP 2.5" lower spindles and 2" lower springs on stock "A" arms.
Truck also has 20" X 8" wheels, on the front, with zero offset.
Is this just something I need to live with? Awful hard on tires.
Thanks

07-18-2022, 01:15 AM	#1
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,194	Lowered truck requires extra power when turning hard over. My lowered truck requires extra power when turning hard over. I just had the truck aligned and I am surprised by how it acts when turning sharp corners. Extra rpm is required just to get the truck to roll. The truck has CCP 2.5" lower spindles and 2" lower springs on stock "A" arms. Truck also has 20" X 8" wheels, on the front, with zero offset. Is this just something I need to live with? Awful hard on tires. Thanks