Re: 1953 3100 "Honey-do"
I started thinking that while the cab is off, I should look at the chassis harness and get a feel for how it will layout. There were several modules on the Escalade that I won't be using. Mainly the Trailer Brake Control Module (TBCM), ABS, and Vehicle Stability Enhancement System (VSES). I started removing all the wires that were part of these systems. I still have some work to do, but it eliminated a lot of wiring.
At this point, I need to extend the fuel pump and tank pressure sensor along with the line pressure sensor, purge valve and mount the Fuel System Control Module (FSCM). Also, need to swap the left and right taillight pins in the connector since the harness was made for the left side of the chassis and I'm going to put it on the right side.
That's all for now. More to come.
|