[youngrodder]

Trans update......


I got the trans back on Friday. No internal damage which was good. Seal replaced. The stock trans pan's drain plug was seized on. I decided to swap the pan for a larger one (with a functioning drain plug) that will also cool better.

I also decided to add a 2nd trans cooler. The trans cooled thru the bottom of the radiator. I deiced to add an additional inline cooler after the fluid leaves the radiator and before it goes back in the trans. Like most things on the Suburban I wanted to hide the cooler so it didn't look like an add on while keeping the additional lines short as possible. I settled on the front of the Suburban behind the front grill in front of the core support down low. I think it will catch a decent amount of air there.

I also was able to use -6an fittings - 5/8" hose barb so I could tie into existing lines. I also had left over braided line so no money spent there. That almost never happens.

All that is left is to install the shifter, hook up the battery and fill the trans.

Thank you
Marc