Thread
:
My 1967 Build (Finally)
View Single Post
12-14-2022, 10:48 AM
#
158
KyleSeal
Senior Member
Join Date: Mar 2014
Location: Toano, VA
Posts: 843
Re: My 1967 Build (Finally)
SLOW season is upon us (me). I hurt my back pretty bad, not quite sure how. So here's some pics of progress I've made. I finished installing the brow, and repairing the inner roof structure and above windshield. i then went ahead and wire wheeled everything, and use a media disc to remove deep rust and the adhesive for the fiber board in the roof. Once that was rather clean, I went after it with some phosphoric acid to get into the deep pits of rust and help keep those from continuing to eat. I will POR-15 the inner roof area, but first I went after any joints or pinch areas with rust encapsulator to stop the rust there as well, and seam sealed with SEM, and top coated with the Eastwood rust encapsulator. Once the temp gets higher than 50 in the garage I will POR-15, do a final seal if needed, and install a sound deadener (Kilmat 80mil).
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."
My Build Thread (1967 C10, lowered, EFI, daily truck):
http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal
View Public Profile
Find More Posts by KyleSeal