The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**KyleSeal** · 12-14-2022, 10:54 AM

Almost completely forgot about doing this one. Had to split the upper bow in two, long ways, and reshape the body line as shown. The issue was the windshield gasket would bunch up and not seat properly at the upper bow was too 'tall' and didn't set the gasket depth where it needed to be.

Name: IMG_2769.jpg
Views: 774
Size: 38.2 KB

Name: IMG_2769.jpg
Views: 774
Size: 38.2 KB

Name: IMG_2768.jpg
Views: 778
Size: 30.2 KB

Name: IMG_2767.jpg
Views: 769
Size: 73.0 KB

Name: IMG_2766.jpg
Views: 768
Size: 70.3 KB

12-14-2022, 10:54 AM	#160
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 843	Re: My 1967 Build (Finally) Almost completely forgot about doing this one. Had to split the upper bow in two, long ways, and reshape the body line as shown. The issue was the windshield gasket would bunch up and not seat properly at the upper bow was too 'tall' and didn't set the gasket depth where it needed to be. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809