The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Trailing arm crossmember with No Limit Arms

**biketopia** · 12-20-2022, 02:58 PM

I'm in the process of starting the install of my full No Limit Engineering wide ride kit. I'm working from rear to front currently. The rear kit https://nolimit.net/store/63-72-C-10...stem-p63365097 comes with new mounts for the trailing arms. My question is has anyone used a different trailing arm crossmember that has provisions for exhaust to go through it? I called No Limit and they couldn't confirm if any would or would not work with their kit. I don't see why one of these wouldn't work, but was hoping maybe someone has gone down this road before.

https://tinworksfabrication.com/prod...m-crossmember/

12-20-2022, 02:58 PM	#1
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,011	Trailing arm crossmember with No Limit Arms I'm in the process of starting the install of my full No Limit Engineering wide ride kit. I'm working from rear to front currently. The rear kit https://nolimit.net/store/63-72-C-10...stem-p63365097 comes with new mounts for the trailing arms. My question is has anyone used a different trailing arm crossmember that has provisions for exhaust to go through it? I called No Limit and they couldn't confirm if any would or would not work with their kit. I don't see why one of these wouldn't work, but was hoping maybe someone has gone down this road before. https://tinworksfabrication.com/prod...m-crossmember/ __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350