Quote:
Originally Posted by e015475
Mine didn't come with any holes. I put post style LED license plate lights on it - barely adequate. The flip down plate is held up with magnets, which makes it much easier to fuel the truck if you're not fighting the spring. From any viewing angle except sitting on the ground, the 2nd gen Camaro fuel tank isn't visible with the MarK pan
There isn't much of a flange to bolt the sides of the MarK pan to the bed (also MarK) so I used some tank clamps off a Model A Ford (28 or 29) to pinch them together. Youngrodder's solution of welding them together is probably best, but I wanted to be able to take them apart
|
I used those same bolt/lights on a Jeep and found them to be barely adequate too. I'm happy that the Mar-K roll pan isn't pre-drilled for lights. That will allow me to choose whatever method of lighting i wish. Thanks for the photos.