[mongocanfly]

So I pulled the canker sensor..set up a multimeter test like shown on video..
got no reading from the signal wire..
So I got a new crank sensor.. installed it..still nothing..
HG suggested checking with a scanner.. so I hooked it up set it on live mode..
It shows 0 rpm while cranking....
Biketopia..I asked for acdelco at parts store but they didnt have one. So I took store brand to try..
Plan was if that fixed it I would get the acdelco and swap it out.
But I'm still searching for what's wrong..
Electronics dont bother me when they work..but when they dont work, it gripes me to no end..
I'm not a good electrical troubleshooter and its frustrating