Quote:
Originally Posted by kev2809
I'm trying to see if my door alignment is a problem or normal. I don't have any rubber in yet, but it seems both my doors align pretty decent up to about halfway up the door and it starts going in. Now, the driver side "4th door area" was hit when I got it, so I welded welding rods to close the gap, but the passenger side was not. they both have the same gap though. all 3 doors are getting new hinge pins but the only one that is really stiff to open right now and close is the passenger side one (that didn't get hit).
could it just be the strikers that need adjustment.. or is this gap "normal"?
1st 2 pictures are driver side door, other 2 pictures are passenger side
|
That is definitely a little excessive. As some others have suggested, I would roll the window down, insert a board at the top rear of the frame and gently push in on the lower door by the door handle and see what happens. Don't push real hard at first because sometimes they move pretty easy and you can go too far with it.
LockDoc