Quote:
Originally Posted by kwmech
Now you can unplug at the firewall and try again. Short may be in the column or the turn sig switch. Orange is power to the BL switch and the white wire goes into the column up to the switch and back down both turn sig wires to the tail lamps only to be cancelled on either side depending on which way you activate the signals. So your right turn is probably the culprit
|
I unplugged at the firewall and pushed the brake pedal and it blew the fuse. I pulled out the turn signal switch and the green wire had been pinched. I wrapped some tape around and the turn signals work both left and right but when I push on the brake pedal it still blows the fuse.
Does it matter how the brake light switch is plugged in, Orange and white wire on either side of the switch?
I’m going to pick up a new turn signal switch and maybe a brake light switch tomorrow and try that. Just don’t know what else to try.