|
Re: Jans 53
Pretty simple job, just time consuming. I ordered a template from summit and used a transfer punch to mark for new holes. The hardest thing was getting the transfer dead on, just took my time. Did have to take a hole saw to open up the hole in the center of my drill press table so I could fit the axle through.
Today I made new leaf spring perches so I could move the perches a 1/2 inch to line up with the s10 leaf springs. Most people say you don’t need to and that it’s close enough. I guess I just can’t live with that so I’m moving them.
Bought myself a new tig welder last month been playing with it trying to get dialed in. I always used a big old miller of my friends. It was pretty simple you know a/c d/c. This one has a lot more options like balance, pre flow, post flow blah blah blah so it taking a little time to learn this machines settings.
|