Quote:
Originally Posted by jayoldschool
I've posted this before, but here's how I got my brake lights to work properly:
- removed the lenses, removed the buckets
- added a ground from bucket to bed
- added a ground from bed to frame at back
- added a ground from bed to frame at front of bed
- added a ground from back of cab to frame
- added a ground from front of bed to cab
Brake lights work perfectly now. Before, one worked dimly, and one only had "lights on", no brake illumination.
|
That's a lot of grounds... Would the tail light work and no brake lights if it was a ground issue?
Thanks