[easyrider]

Well, i beat my head against truck door for a couple hours with this. I tested wires from fuse box (orange and white) and there are two orange wires run into plug and one white wire and they plug into wire to interior light. The wiring harness is m & h and everything seems to work well. But, my white wire is hot and the orange wires don't complete the circuit. I don't know about why, but that is the way it is, so i have to go with it. I'm not getting a ground when i rotate the light switch all the way to left till i feel the indent. I can ground the light at bulb and it will burn, so i know my problem is with ground switching. Does the light switch have to be mounted and grounded? I'm not getting anything from orange wires. And, would i be experincing this problem if my headlight switch was bad? It's new but doesn't mean it's working correctly. This should have been relatively simple but its turn into a nightmare. Thank you for letting me pick your brain.