[jwhotrod]

I've wired a bunch of car, and i will say this. the indicator light feeds in your dash are connected to the turn signal wires for the front lights so they are not lit when you step on the brakes. when you turn the turn signal on the switch disengages the rear turn/stop wire from the brake post and connects it to the front wire and the flasher. when you turn on the hazard on it disconnects both rear turn/brake wires from the brakes and connects to the hazard flasher. so if you hook everything up to the color coded wires everything will be find and your hazard button will light in the turn signal indicators in your dash just fine. what is in your idditt column is a standard GM turn/hazzard/brake switch do not take it apart its not neccesary. Good luck