Quote:
Originally Posted by kwmech
Axle shafts are the same as the hub is offset in the casting of it. Hub flange mount for the shaft is the same. Been a while since I've done some thing similar, but there was something off with the backing plate and its mounting. I don't remember what I did at the moment as I was working on a 14 bolt, but they use the same hub depending on which 70 you have. I was working with a 70hd
|
I've read you can use the 14b FF drums but you have to mill down the back of the drum because it rubs the backing plate. So maybe that was the issue you were running into as well.
He is working with a 70HD as well, so it sounds like that if it would work I would need to get SRW axles as well.