Re: 1968 C10 Project "The Twin"
Well nothing really to report lately. Been spending the summer driving the wheels off since the bucket seat swap was wrapped up. About to get started on the new motor though that is gonna go in. Picked up a 68 327 last year and have been collecting parts to finally send it off to the machine shop this fall. Mainly just needs to be flushed out since the cam had 2 bad lobes when I tore it down. Already have the heads done. Motor had a set of 69 Z/28 factory 2.02 heads on it that have been really ported and cleaned up. Based on what I can tell the cam when bad during break in or improper break in wiped the cam as there is still fresh hone marks and zero ridge in the cylinders. Now the question is to swap the 4 speed for a tremec 5 speed when I swap motors.
Some pics of the summer adventures so far...
|