Re: 1968 C10 Stepside Restoration Project
So this past weekend I was able to start working on the truck frame...well more accurately, remove the bed from the frame. All of the bolts had to be cut with my trusty saws-all. The only bolts that would come out were the ones securing the bed end piece to the bed sides. Fortunately I had sprayed everything with PB Blaster ahead of time. I am just going to dismantle the bed to help in clearing off the frame. I will likely get new besides and a new passenger side rear fender. The only thing still holding the bed to the frame are the 4 fender supports.
|