Quote:
Originally Posted by Justin71105
Filled mine today at the gas station, it overflows quickly with the inline filter No Limit sent with the tank. So had to fill super slow.
But when I took that filter off it vented ok, 1/4" hose for vent tube.
Going to move up to 5/16 line when I do my bed fuel door and get the same filter you show.
That line size should take care of venting pretty good for you.
I am going to run the vent line up in the stake pocket hole.
Should be high enough and hopefully be able to fill with full handle pull.
|
This is a rough mock up of what I have done except I have made a bracket (to be welded soon) to hold the filter separately. So, 5/8 return line connected to a bung that is welded high on the filler neck. 5/16 line from the rollerover vent to the small air filter.