The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

geezer#99 · 11-15-2023, 08:15 PM

Put a flashlight on the top side so you can see fitment of the plates in the bore.
Should see light evenly all the way around.
Check shaft movement side to side while checking with the light.

11-15-2023, 08:15 PM	#12
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,522	Re: Can't bring idle below 1000 Put a flashlight on the top side so you can see fitment of the plates in the bore. Should see light evenly all the way around. Check shaft movement side to side while checking with the light.