Re: 1968 C40 to K40 pickup project BlueMule
With the roof tacked into place, and the inner rockers all finished up, I used sections of new rockers from classic industries along with some original sections to stretch the outer rockers. I then bolted them into place in the front, and used a self tapper to hold the back and underside in place until I am ready to weld them in. I want to have the doors in place in order to check the gaps before welding them in. I then removed the inner support structure I had used, and cleaned up the welds a little. I also made sure the transmission tunnel cover fits and could be bolted in.
__________________
Mike
67 Camaro "Amber"
72 K10 Longbed "Old Green"
68 C40 to K40 project BlueMule Build
2006 GMC Sierra "Lello Truck"
|