The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - I need pictures of a front sway bar installed

haulna · 06-14-2002, 06:10 PM

You will need four rubber bushings and four metal bushing brackets. Make sure your lower A-arms are pre drilled to accept the bushing brackets. As Low69CST stated, you will have to remove the cross member rivits and replace with the bushing bolts.

06-14-2002, 06:10 PM	#8
haulna Registered User Join Date: Jul 2000 Location: Oregon Posts: 267	You will need four rubber bushings and four metal bushing brackets. Make sure your lower A-arms are pre drilled to accept the bushing brackets. As Low69CST stated, you will have to remove the cross member rivits and replace with the bushing bolts. __________________ 72 Chevy SWB