Quote:
Originally Posted by A1971Blazer
It's difficult enough to troubleshoot a problem when you're right there with it.. 
Possible causes and solutions from a keyboard (and some experience) are more difficult.
Everyone here is always more than willing to offer up their help. That's what makes this forum so unique.
Often times there are several possible causes for any one particular issue.
Good luck with it and let us know what you discover....  |
Yes, I know how hard it is troubleshooting while here or from a keyboard.
I sprayed some PB BLASTER in the hole, and all around inside hole the best I can. I'll do it again in a little bit.
Is the shift lever supposed to move [ when pulled toward you to change gears] back and forth on the pin that mounts it to the column, or be fixed to column by mounting pin? I noticed that when I pull shift lever toward me as when to change from Park to another gear, the housing that shift lever is mounted to moves back and forth when I pull lever towards me.
Image shows housing that shifter is attached to that moves when I pull lever toward me...