Re: Getting brake lights to work
I disconnect the harness from the steering column and tested the wires with a tester. I believe I isolated the problem to the turn signal switch or the headlight switch. On the brake switch connector unplugged from the brake switch I have 12V on the orange wire, the white wire has a dim light indicating a bad ground will need dig deeper this weekend.
Headlights off: all turn signals and brake lights work
Headlights on with ignition off: all turn signals and brake lights work, taillights go from low light to bright red when brakes are applied
Headlights on with ignition on: all turn signal work, brake light dont change brightness. They stay super bright like the brake is applied.
|