1/ Make absolutely sure you have the throttle valve cable correctly installed and adjusted....contact Jasper for instructions.
2/ Never drive a 700R4 with a disconnected or incorrectly adjusted TV cable.
3/ Raise rear wheels off the ground and place car stands under axle.
4/ Install 4 quarts of correct ATF into the trans and start engine.
5/ Ensure no oil leaks from any piping or trans.
6/ Run engine at idle, add 3 more quarts to trans and check oil level on dipstick. Add oil until level is at top cold marker.
7/ Place transmission in Reverse and idle the vehicle. Apply brake and shift to D. Accelerate slowly and check for change pattern is correct. Apply brakes and place trans in P.
8/ Check atf oil level is correct. Check for oil leaks.
9/ Place vehicle on ground and gently drive vehicle around the block checking for correct shift points etc.
10/ Check for any oil leaks.
11/ Double check the TV adjustment is correct.