|
I USED L SHAPE OR ANGLE IRON 1INCH 17 IN LONG.THEN CUT 2 FLAT PIECES 6 IN . WELD THE FLAT 6 IN ON THE END OF ANGLE FLAT DOWN.FOLLOW THE BOTTOM OF THE SEAT FRAME. THE ANGLE GOES ACROSS THE FRONT OF SEAT BOLTING TO FRAME. THE 2 6IN FLAT PIECES BOLT TO BOTH SIDES OF THE SEAT FRAME. THEN HOLD THE BENCH SEAT BRACKET UP THE SEAT IT HARD TO EXPLAIN BUT IF YOU HOLD YOUR BENCH SEAT BRACKETS TO THE SEAT FRAME YOU WILL SEE HOW THIS BRACKET FITS THE SEAT TO THE BENCH BRACKETS IT NOT HARD JUST A SIMPLE MODIFICATION GOOD LUCK
__________________
69 SHORT FLEET SIDE MAROON RESTORED.
71 LONG FLEET RESTORED D/DRIVER. BUT ALWAYS LOOKING TO IMPROVE 68 SHORT UNDER CONSTRUCTION
|