The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

GreenMystChevy · 06-20-2002, 10:05 AM

Just got the old heads off, of course that was the easy part. I can always take things apart, it's getting them back together in good shape that is the tough one.
I found this old Chilton's manual around the house, from back in the mid 70's, that has all of the specs.
Is there anything that I need to be more careful of than anything else? Also, what would be a good way to clean the stuff up around there? All the carbon and little sand stuff. Thanks a lot for the reply guys.

06-20-2002, 10:05 AM	#6
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	Just got the old heads off, of course that was the easy part. I can always take things apart, it's getting them back together in good shape that is the tough one. I found this old Chilton's manual around the house, from back in the mid 70's, that has all of the specs. Is there anything that I need to be more careful of than anything else? Also, what would be a good way to clean the stuff up around there? All the carbon and little sand stuff. Thanks a lot for the reply guys. __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall