The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How do you remove the door latch assembly?

gonebad2 · 10-09-2004, 09:00 PM

Unbolt the weatherstrtip channel ( two 1/4-20 phillips head screws under the door panel and one 7/16" head 1/4 20 bolt on the outside of the door shell. Pull it forward a little bit. It will give you the room you need to get it out. Tip: Re-attach the actuator rods to the new door latch assy BEFORE you bolt it in place. It's a real pain to try and connect them when it's bolted in place.

10-09-2004, 09:00 PM	#2
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Unbolt the weatherstrtip channel ( two 1/4-20 phillips head screws under the door panel and one 7/16" head 1/4 20 bolt on the outside of the door shell. Pull it forward a little bit. It will give you the room you need to get it out. Tip: Re-attach the actuator rods to the new door latch assy BEFORE you bolt it in place. It's a real pain to try and connect them when it's bolted in place. __________________ Your Bought And Sold....I Got Your Soul!