The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**JIMs70GMC** · 11-08-2014, 08:10 PM

The 1984 SM465 and 1984 NP205. Tomorrow I am going to remove the old pedal assembly and mark the firewall to mount the master cylinder and reservoir. I also need to look into cross members, not sure if the auto cross member will work, looks like it does not drop down in the center far enough.

11-08-2014, 08:10 PM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: Project "Man Pedal" The 1984 SM465 and 1984 NP205. Tomorrow I am going to remove the old pedal assembly and mark the firewall to mount the master cylinder and reservoir. I also need to look into cross members, not sure if the auto cross member will work, looks like it does not drop down in the center far enough. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm