The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Snowbound · 07-16-2013, 01:26 AM

Got my go pedal installed, along with the throttle cable. I used a complete set up from a mid '70s C10.

There are 2 flat bosses on the firewall that are ideal for running the cable through. Simply drill a 1/2" hole and square it up with a small file. I had to bend the pedal arm over about 1.5" to line up with the lower boss.

Still need to find a bracket that will work with my carb (Quick Fuel Slayer - Holley 4150 clone). The factory bracket was too close to the firewall. I'm trying to not use the $90 billet bracket!

Having pic upload issues tonight....
Posted via Mobile Device

07-16-2013, 01:26 AM	#59
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 401	Re: Project Okanagan Sunset Got my go pedal installed, along with the throttle cable. I used a complete set up from a mid '70s C10. There are 2 flat bosses on the firewall that are ideal for running the cable through. Simply drill a 1/2" hole and square it up with a small file. I had to bend the pedal arm over about 1.5" to line up with the lower boss. Still need to find a bracket that will work with my carb (Quick Fuel Slayer - Holley 4150 clone). The factory bracket was too close to the firewall. I'm trying to not use the $90 billet bracket! Having pic upload issues tonight.... Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600