|
Re: Pressure plate
So, I have taken this transmission off 3 times so far. I replaced the TOB with a Ram brand which has more travel. Finally, after many bleedings, my clutch engages well, but now, I have a leak inside the bellhousing which I don't know where it comes from. I am assuming it is leaking from the bearing. I am keeping eye on the fluid to see if it is going down. I used teflon tapes (per Ram instruction) to seal the fittings.
At least I can drive the truck for now.
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
|