|
Re: Smaller/thinner rear brake drum? Deep rear steelies won't fit!
Ok looking at your wheel is the lip of the drum folded part of the rim that is not weld. If so just grind the fold lip of the inner rim none welded off. Because it looks like it taking up about 3/16 to 1/4" of space of room compared to the weld lip.
The rim's may not be made for C10-1/2Ton direct bolt on.
Try to lay the drum line up with the lug holes flat if it hitting those lips then the the fix.
Or take it to a shop get it done.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|