[aggie91]

Rian,

I saw it on FB too, but was not where I could help out. Yes, they are left and right threads.

The ES409LT is the INNER Tie Rod End. You need to get the ES409RT for the OUTER Tie Rod End. I recommend getting the new adjuster sleeves too. You can put them together in the comfort of you living room before heading out into the cold garage. Pull of the set on one side and make the new set match the length of the old set. This gets you close on the toe adjustment. the Adjuster sleeves are part number ES2004S in Moog ($7.08USD each) or Quick Steer ($1.81USD each) on RockAuto.com.

FYI - Moog and Quick Steer are BOTH brands from Federal Mogul which is now part of Tenneco.

Once you have both sides reassembled you can adjust the toe as needed till you can get to the alignment shop.