The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Electric Cooling Fan How-to

memphismatt · 12-29-2009, 09:26 PM

Next I put the fan inside the shroud and put it back in the truck to see how much clearance i would need in front of the water pump. I pushed it forward as far as it would go without coming out of the round part. I marked all three tabs, and used a dremel tool to cut three slots in the shroud.

12-29-2009, 09:26 PM	#2
memphismatt Registered User Join Date: Aug 2007 Location: Independence, MS Posts: 61	Re: Electric Cooling Fan How-to Next I put the fan inside the shroud and put it back in the truck to see how much clearance i would need in front of the water pump. I pushed it forward as far as it would go without coming out of the round part. I marked all three tabs, and used a dremel tool to cut three slots in the shroud. __________________ '68 C 10 short step '92 C1500 RCSB '92 C3500 ECDRW '96 C1500 ECSB Last edited by augie; 02-16-2012 at 09:56 PM.