The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Electric Cooling Fan How-to

memphismatt · 12-29-2009, 09:37 PM

After that I cut some strips of 16 or 18 gauge sheet metal. bolted it to the holes in the fan and then ran some tech screws through the shroud and into the strips.

This is the finished product.

12-29-2009, 09:37 PM	#3
memphismatt Registered User Join Date: Aug 2007 Location: Independence, MS Posts: 61	Re: Electric Cooling Fan How-to After that I cut some strips of 16 or 18 gauge sheet metal. bolted it to the holes in the fan and then ran some tech screws through the shroud and into the strips. This is the finished product. __________________ '68 C 10 short step '92 C1500 RCSB '92 C3500 ECDRW '96 C1500 ECSB Last edited by augie; 02-16-2012 at 09:51 PM.