Time for the radio and CB.
I bought an original AC Delco radio and had R&B Vintage Audio rebuild it. I went with just an AUX input, but if I had to do it over, I would have also added bluetooth.
The PO cut the dash for an aftermarket radio. I put a patch in, but I didn't do a good job. I tried a combination of welding and rivets. It worked fine, but you can still see where it was cut after the bezel was installed. Think I'll tackle that next winter.
The PO also had a CB antenna in the roof with a 3/4" hole. The antenna was outdated, so i added a new Larsen NMO 27 whip antenna and a vintage CB I found on Ebay.
The old antenna mount...
...and the new Larsen.
CB and radio installed....
