Quote:
Originally Posted by kwmech
Toss that piece of cr.. aluminum shim and spend a little extra and get a bolt on steel shim. BUT first, are you sure you even need the shim for a 2.5 lift? If you need it to roll the pinion up for driveshaft you will lose caster alignment as these trucks like at least a 5-6 degree reading.
|
Nothing wrong with that shim, and if you had read from the beginning, CJM is increasing the caster, not reducing it. Adding the shim has nothing to do with his 2 1/2" lift, and in fact these shims would benefit even with zero lift.