Quote:
Originally Posted by Mickeymotormount
Great write-up. I've been looking for info about this swap not knowing it was here on this site.
Gonna be doing this to my '67 c20 with a 327. It will replace the old SM 420 that is currently in it.
|
Good deal!
You should be able to use all of your stock parts except maybe your bell housing. Your bell housing would be the same as the one I used except that the front bearing retainer hole is the small (4-11/16") diameter instead of the 5-1/8" needed for the NV4500 transmission. You can either have yours bored out to 5-1/8" or find a bell housing from a truck with the SM465 manual transmission. (1968 up)
Let us know how it goes.... Or post a link here if you start a thread on your swap.
LockDoc
.