View Single Post
Old 06-20-2022, 04:46 PM   #72
NoNeck
Registered User
 
NoNeck's Avatar
 
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 1,106
Re: Another one underway! Meet project Savannah

Some progress over the weekend. After wearing out 4 Flap wheels on the grinder and assorted grits of sandpaper, the frame was pressure washed one last time.

After a lot of research we decided to prime and paint the frame with a new product from Eastwood Company. My air compressor is too small to keep up with Chad's paint gun, so we ordered Eastwood 2K AeroSpray Epoxy Primer. It is a true 2 part solvent/catalyst spray paint in a rattle can.

After wiping down the frame with grease/wax remover I suited up in Chad's Paint Respirator, Safety Glasses, and Neoprene Gloves. THIS STEP IS VERY IMPORTANT.

Then I applied a base coat of the Epoxy Primer. After 48 hours cure time, I added a second coat of the Primer. The spray pattern was great and easy to apply without runs. Turned out really nice.

POP
Attached Images
 
__________________
2016 RAM Laramie HEMI
1966 Fairlane GT/A, 390/335 HP

If it costs you a dollar to make a friend, KEEP THE DOLLAR.
If it costs you a friend to make a dollar, KEEP THE FRIEND.

Last edited by NoNeck; 06-20-2022 at 04:54 PM.
NoNeck is offline   Reply With Quote