|
‘72 lwb c10
1972 Chevy C10 LWB, AC cab automatic. Truck was a project that I’ve had for a while. A cross country move means that it has to go. It’s a roller only, no motor in the truck. I do have the 350 automatic that was in it that’ll go with the truck. Cab is rusty, rockers are gone. I started the project with some chassis repair.
New:
-trailing arm bushings
-rear wheel cylinders
-parking brake cables (all 3)
-panhard bar bushing
-soft brake lines
-new front springs, original non-lowered
-rebuilt the upper and lower control arms (Moog)
-ball joints
-control arm bushings
Steering- Moog
-new inner and outer tie rods
-new idler arm
-Pittman arm
Brakes
-rebuilt calipers
-good pads and shoes
-new soft brake lines
-new wheel seals and repacked wheel bearings
I was planning on going the rat rod route due to the condition of the body. It has great patina. Tires hold air, steers and stops. Truck is located in Bluffton, SC and will need to be towed. Asking $2000 OBO. Clean SC title in hand.
|