Quote:
Originally Posted by tlorber
I had a radiator guy braze a steam port bung near the top of the radiator tank (1/4 " tube). The steam line goes from the heads to the bung via a rubber tube. The picture attached is not mine, but it shows the tube along the main radiator feed. As long as the steam port is near the top of the cooling system, you're fine.
Attachment 1766092
|
I guess my question is so I have to use the LS OEM pressurized tank I got with engine?
Heater lines to heater core - check
Radiator in/out - check
Steam port to rad. - check
All that's left is small tube at alum. radiator neck. Old school overflow set up to this?