The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

crossfire84 · 07-02-2013, 04:10 PM

Put my fuel tank in and put the filler on the rear fender, saw this done by a member on his TF. it looked so cool I had to do it on my AD.
I used a 1 1/2" hole saw to get things started then went in with a die grinder with a 3/16" carbide ball fine pitch cutter, very easy on the fender no heat build up. I found a piece of 1 1/2" exhaust tubing on the speedway web with multiple bends in it, perfect. I thought i'd keep the stock filler unit with the truck.

07-02-2013, 04:10 PM	#61
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: LIL ERV the 50 Put my fuel tank in and put the filler on the rear fender, saw this done by a member on his TF. it looked so cool I had to do it on my AD. I used a 1 1/2" hole saw to get things started then went in with a die grinder with a 3/16" carbide ball fine pitch cutter, very easy on the fender no heat build up. I found a piece of 1 1/2" exhaust tubing on the speedway web with multiple bends in it, perfect. I thought i'd keep the stock filler unit with the truck. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive! Last edited by crossfire84; 07-02-2013 at 04:17 PM.