|
Re: LT1 GenV swap
Quote:
Originally Posted by NC_John
Might have found the answer to my own question- I think they are also using the vacuum for the DOD system. Of course, if that is disabled the pump could be removed.
It looks like ICT Billet has a pretty good answer to the power steering question and at a much more reasonable cost compared to the others. The only issue I see is that the pump appears to be put on the wrong side of the engine requiring more hoses across the front end.
http://www.ictbillet.com/lt1-l83-alt...uck-gen-v.html |
I just dont like the coolant hose routing, nor the power steering on the passenger side.. when said and done the front end will be simple and clean.. once everything is put together. Since i ordere a few more of the adapters, 5 sets total, ill likely make 5 sets of alt and power steeeing pump brackets as anotjer solution for others.
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|