Quote:
Originally Posted by Wasted Income
Rebuilt the transfer case last weekend, and swapped to the 32 spline input that I needed to mate to the 4L80E. Also pulled the pan off the trans, and cleaned everything up in there...then painted it all.
Got the engine/trans/t-case set in place...kinda/sorta last night. Was bummed to find that the stock 4x4 trans crossmember will not work with an NP241. The front output would be directly in line with the crossmember......so I guess I get to fab one up.
|
Very nice progress! Have you seen
THIS thread? Crash_ok had to deal with some fitment issues too. Anyway, lot of good info in his 4X4 LS build