Re: 1953 3100 "Honey-do"
It's been a few weeks so I should do an update. The cab corners were the only major sheet metal work left on the cab. Each had pencil size holes rusted through them. I started with the driver side first.
I ended up having to fab some of the inner corners that had rust issues.
While I was in there, I took the time to add a bolt mounting point for the seat belt retractor. I welded a nut to a 14 ga plate and bent it to fit the curve and welded it in just below the reinforcement bracket behind.
Last edited by rnrdthefox; 06-07-2021 at 12:00 AM.
|