The compatable front suspensions for the '60-'62 trucks is any '71-'87 C10 front suspension. You will have to change the entire suspension, crossmember and all. On the '60-'62' there are more holes that need to be drilled as compared to the '63-'70's. I believe member markeb01 did a writeup on this conversion, as he has done it on his '60. It might be referenced in the '60-'66 FAQ index at the top of the page.
Typically the 5x5 conversion is done as this is what the C10's with disc brakes came with. You can buy aftermarket 6 lug rotors that fit the '71-'87 HD spindles.
As for the brakes, yes I do sell brackets for that. There are links to the for sale threads in my signature line. Here is the one for the auto trans version
http://www.67-72chevytrucks.com/vboa...49#post3479149
Quote:
Originally Posted by whlman5150
Hello all, I am new to the forums and am trying to gather some information for a new project I am beginning. I picked up a 62 Chevy C10 shortbed fleet side. The truck needs work to get it back on the road, the rust issues, body, engine, etc. The truck has the straight six (not sure of the engine size..if anyone has info to do this it's appreciated), drum brakes all around, I believe its a 4 speed..on the floor, has a 10 bolt rear end, not sure if it has a positraction or what the gears are.
Some of the modifications and upgrades include putting an LS engine and 4L60e tranny in it, upgrading the brakes to disc, fronts first and rears later. I plan on taking it down to the frame to start cleaning and repairing so I am trying to decide the way to go on the suspension and brakes. I am on a moderate budget so keeping that in mind here are my questions.
For the 62, what year front suspension / brake swap is recommended? Also need info about running a master cylinder and booster or possibly a hydro boost. I think I saw a thread from CaptFab about a hydro boost, just can't find it now.
I've seen people do the 5 lug conversion. Is this done to add the disc brakes or because of wheel choice and available rims for a 5 lug? And, if you do the swap, do you want to go with the 5-4 3/4 or 5-5? Is changing over to a 5 lug recommended or stay with 6?
My plans for the truck include rims and tires. The look I'm going for is a lowered profile look with a slight rake. I'm not sure if I want to run air bags but will definitely be lowering it, nothing crazy I still want it drivable. The rims I was thinking about are either 22x10 in rear, 20x10 in front or just running 20s all around....still looking at different combos. But again, goes back to my question about the lug patterns.
Any information is appreciated...just trying to get this thing going. Thanks!
Gary
Posted via Mobile Device
|