Replaced the leaking output shaft seal. Seems to be leaking a tiny bit still though from the yoke though. Any thoughts?
I have been driving it around my neighborhood a bit to get some shake down miles on it and not be to far from home if I don't make it.
Cut part of the bed mounts I made off so I can have them slotted for adjustment. Adding a bit more tube as well.
I would like to say I planned on removing the bed gap but I set my rear end to be centered at ride height and not when laid out. So I pushed the bed forward a bit to make up the difference. The black strip is primer that I need to rattle can white or something for the mean time. The bedside isnt mounted or anything since I need to tweak a few things first.
[url=https://flic.kr/p/2kJbn9C]