The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

carbon69 · 04-16-2020, 02:15 PM

Replaced the front steering with all new components on my 67c10. Had been converted to 5 lug with 71 parts. Also installed a ccp 50014 steering box. Problem is, my center link is making contact with the crossmember on the driver's side. Just curious if anybody else had used this steering gear and had this issue. The center link is orientated correctly. Seems like the pitman arm needs to suck up on the spines more, but it's as far as it will go. Using a Moog k6131 Pitman arm.

I did notice that the steering gear hangs a little lower than the stock box.

Thanks

04-16-2020, 02:15 PM	#1
carbon69 Registered User Join Date: Aug 2013 Location: billings Posts: 38	Center link hitting crossmember??? Replaced the front steering with all new components on my 67c10. Had been converted to 5 lug with 71 parts. Also installed a ccp 50014 steering box. Problem is, my center link is making contact with the crossmember on the driver's side. Just curious if anybody else had used this steering gear and had this issue. The center link is orientated correctly. Seems like the pitman arm needs to suck up on the spines more, but it's as far as it will go. Using a Moog k6131 Pitman arm. I did notice that the steering gear hangs a little lower than the stock box. Thanks