The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Braunschweiger · 10-06-2022, 02:26 PM

Today there was a Setback..... I put the Infrared Heater over the Panel. After some time there were Bubbles on the edge of the Bodyfiller, the Temperature was 50°/ approx.125 degrees Fahrenheit. This happened in 2 places, I could simply peel off the areas with the spatula. The rest was fine, something was wrong with the hardener and filler. I started all over again and filled with new Bodyfiller the spots.
#@€#% happens.
Better now than later.

10-06-2022, 02:26 PM	#223
Braunschweiger Registered User Join Date: Aug 2020 Location: Braunschweig, Lower Saxony, Germany Posts: 752	Re: A '62 has to get back on the road Today there was a Setback..... I put the Infrared Heater over the Panel. After some time there were Bubbles on the edge of the Bodyfiller, the Temperature was 50°/ approx.125 degrees Fahrenheit. This happened in 2 places, I could simply peel off the areas with the spatula. The rest was fine, something was wrong with the hardener and filler. I started all over again and filled with new Bodyfiller the spots. #@€#% happens. Better now than later. __________________ ------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 Last edited by Braunschweiger; 10-06-2022 at 02:44 PM.