The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 05-25-2010, 07:10 PM

Lift the arm up as high as it will go. You have to hold it in that position while prying the bottom off its pivot. Seems like you need three hands to do it but it will come off with some coaxing.

Warning: they may be stuck so it may require some serious prying or coaxing. I use a towel under a claw hammer or pry bar and ease it up. Try not to damage the paint.

05-25-2010, 07:10 PM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: wiper arms Lift the arm up as high as it will go. You have to hold it in that position while prying the bottom off its pivot. Seems like you need three hands to do it but it will come off with some coaxing. Warning: they may be stuck so it may require some serious prying or coaxing. I use a towel under a claw hammer or pry bar and ease it up. Try not to damage the paint.