|
Re: New Qa1 crossmember
Quote:
Originally Posted by StorminNorman
They say its compatible with their existing a-arms, which are designed to mount to stock locations. So not sure how they would change things? (much).
I have a set of their lower arms and they are nicely made.
|
It would make no sense if they weren't compatible w/existing parts.
If you look @ the lower a-arm attachment points, there are 2 slots on each side for the lowers. Using the inner slots would reduce track width. Using the outers would increase it. Not saying it's a significant amount but some of the aftermarket lower arms are available 'narrowed' to help put things where you want.
I see the 2 position options as a decent idea to help dial in track width & also for tweaking alignment:
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
Last edited by SCOTI; 07-01-2022 at 08:12 AM.
|